wire straightener

How to adjust the wire straightener

1. It is crucial to fix the straightener on the workbench. In the process of wire traction, the straightener will swing,    resulting in the material will random bending. 2. First, open the control handle of the horizontal and vertical straighteners, and the two sets of straighteners which can be adjusted on one side are all set back. 3: put the steel wire into the straightener groove and close the opening and closing handle (there must be tension in front of the steel wire, or it is easy to jump)  

How to adjust the wire straightener 

4: one side adjustable wheel a tightening, close to the wire, horizontal and vertical to be adjusted. A. The material is stainless steel wire, spring steel wire and so on. The first wheel at the end of the two sets of straighteners must be guaranteedThere is enough downward pressure to make the material fully deform and destroy the original internal stress (too much downward pressure of the first screw will produce material wavesWave shape, the screw should be adjusted), otherwise the material is easy to deformation again after straightening, straightener adjustment is completed, the material in verticalIn each set of straighteners, the process from the incoming line to the outgoing line shall be a gradual change from a large bend to a straight line. B, the material is copper wire, aluminum wire and other non-rebound material, the whole row of wheels can be a straight line.